• Welding of any reservoirs and basins made

    of sheet polypropylene

  • Welding of various plastic constructions made

    of rotary tanks

  • Welding of plating baths, reservoirs and air ducts

    for chemical industry

  • Welding of swimming pools and basins made

    of sheet polypropylene

  • Welding of ultrahigh molecular polyethylene

    for lining bunkers, dippers, bodies...

  • Welding of firewater tanks and other constructions made

    of spirally-twisted polyethylene pipes

  • Welding of HDPE and LDPE geomembrane

    for dampproofing of various buildings

Equipment

WELDING HORS-Т /1360€

Compact hand-held welding extruder for hard-to-reach places.

Welding HORS-T hand welding extruder is used for welding the products made of pipes and sheet polyethylene and polypropylene. With it, you can easily weld in the most inaccessible places.

Joint heating of the hotmelt and welding surfaces
Quick-detachable PTFE nozzles
Supply of hot air through the nozzle
Nozzle rotates in 360 degrees
Minimum dimensions
Technical characteristics
Voltage, In 220
Frequency, Hz 50
Wattage, W 2300
Welded materials Polyethylene (PE), polypropylene (PP)
Efficiency, kg/h Up to 1,5
Diameter of welding rod, mm 3-4
Depth of welded materials, mm 1-15
Regulation of stock temperature, C ˚ Up to 260
Dimensions, mm (WхHхL) 460х270х100
Weight of extruder, kg 4,4
hors
kse_02e

WELDING HORS /1360€

The lightest and most comfortable hand-held welding extruder of 2016!

Welding HORS hand welding extruder is designed for welding the products made of pipes and sheet polyethylene and polypropylene. Due to its small dimensions and rotating nozzle, it is easy to weld in any position and in the most inaccessible places.

Joint heating of the hotmelt and welding surfaces
Quick-detachable PTFE nozzles
Supply of hot air through the nozzle
Nozzle rotates in 360 degrees
Lightweight and easy welding extruder
Works in the most difficult conditions
Technical characteristics
Voltage, In 220
Frequency, Hz 50
Wattage, W 2300
Welded materials Polyethylene (PE), polypropylene (PP)
Efficiency, kg/h Up to 1,5
Diameter of welding rod, mm 3-4
Depth of welded materials, mm 1-15
Regulation of stock temperature, C ˚ Up to 260
Dimensions, mm (WхHхL) 460х300х100
Weight of extruder, kg 4,4

КСЕ-02 /1700€

Time-proved, lightweight, practical and safe hand-held welding extruder

Hand-held welding extruder KCE-02 is intended for welding products made of pipes and sheet polyethylene and polypropylene. With its help it is possible to make vessels for various liquids, swimming pools, treatment facilities, constructions for chemical industry, to weld gravity-flow pipelines, shells of heat-insulated pipes and many others.

Separate heating of melt and welding surfaces
Digital regulation of melt temperature
Cold starting protection
Smooth and stepped efficiency controlі
Lightweight and convenient extruder
Works in the severest conditions
Technical characteristics
Voltage, In 220
Frequency, Hz 50
Wattage, W 3000
Welded materials Polyethylene (PE), polypropylene (PP)
Efficiency, kg/h UP to 2,7
Diameter of welding rod, mm 3-4
Depth of welded materials, mm 1-20
Regulation of stock temperature, C ˚ Up to 260
Dimensions, mm (WхHхL) 490х270х180
Weight of extruder, kg 5,6
kse_02
kse_02e

КСЕ-02Е /1910€

Manual welding extruder for welding wide seams and heavy thicknesses

Hand-held welding extruder KCE-02E is used for welding constructions made of big diameter pipes and sheet plastic (polyethylene, polypropylene). With KCE-02E extruder it is possible to weld spirally-twisted pipes (spiro), to line various surfaces with plastic, to weld fire tanks, inspection chambers, sewage pipes and many other things.

Separate heating of melt and welding surfaces
Digital regulation of melt temperature
Cold starting protection
Smooth and stepped efficiency control
Wide heat penetration of seam area
Works in the severest conditions
Technical characteristics
Voltage, In 220
Frequency, Hz 50
Wattage, W 4200
Welded materials Polyethylene (PE), polypropylene (PP)
Efficiency, kg/h Up to 2,8
Diameter of welding rod, mm 3-4
Depth of welded materials, mm 5-40
Regulation of stock temperature, C ˚ Up to 260
Dimensions, mm (WхHхL) 540х310х190
Weight of extruder, kg 5,9

Welding HORS-3 /2500€

An easy and reliable high-performance extruder

Welding HORS-3 welding Extruder is used for welding products made from pipes and sheet polyethylene and polypropylene. Due to the wide base and the shape of the rear handle, it is suited well for welding long length seams in the lower position. It is irreplaceable for welding geomembranes, reservoirs, waterproofing of various structures.

Separate heating of the hotmelt and welding surfaces
Digital melt temperature Control
Protection against cold start
Wide warm-up weld area
Wide warm-up weld area
Technical characteristics
Voltage, In 220
Frequency, Hz 50
Wattage, W 4500
Welded materials Polyethylene (PE), polypropylene (PP)
Efficiency, kg/h Up to 3,5
Diameter of welding rod, mm 3-4
Depth of welded materials, mm 1-30
Regulation of stock temperature, C ˚ Up to 260
Dimensions, mm (WхHхL) 700х290х110
Weight of extruder, kg 8,0
horse-3
welding-t-rex

WELDING T-REX /2600€

Highly performance balanced hand-held welding extruder for heavy tasks

Welding T-REX hand-held welding extruder is used for welding structures made from large diameter pipes and sheet plastic (polyethylene and polypropylene). Its feature is high performance in combination with a low weight and a balance of all structural elements.

Separate heating of the hotmelt and welding surfaces
Separate heating of the hotmelt and welding surfaces
Protection against cold start
Well-balanced design
Wide warm-up weld area
High performance
Technical characteristics
Voltage, In 220
Frequency, Hz 50
Wattage, W 5200
Welded materials Polyethylene (PE), polypropylene (PP)
Efficiency, kg/h Up to 5,2
Diameter of welding rod, mm 4-5
Depth of welded materials, mm 5-40
Regulation of stock temperature, C ˚ Up to 260
Dimensions, mm (WхHхL) 630х370х190
Weight of extruder, kg 9,0
prutok_PE80

Welding materials

Polyethylene welding rod

Polyethylene (PE) welding rod is used as a filler material for hot air welding and extrusion welding. The polyethylene rod is suitable for all existing models of manual welding extruders.

It is used for welding polyethylene structures: basins, tanks, pressureless pipelines, pulp pipelines, dykes, cases, galvanic baths, air ducts, shells of heat-insulated pipes, containers and products made by rotational molding, geomembranes, waterproofing elements of structures, waterproofing inserts of reinforced concrete constructions and other products made of polyethylene sheets and pipes

Welding rods are produced in accordance with TU U 22.2-36937216 - 002: 2016.

Specifications:
Diameter of rod, mm 3-4-5
Type of rod PE-80, PE-100, PE-300
Weight of coil, kg 2-4-5-6
Color natural, black, green, blue
  • For 15 years the specialists of "Welding" Ltd have been designing and manufacturing hand-held welding extruders and welding materials for plastic welding.

  • Welding extruders KSE-02 and KSE-02E are the product of close interaction of our company with scientific research institutes and industrial enterprises of Ukraine. These models have passed the test in the most difficult operating conditions, leaving behind many European brands.

  • High quality, reliability, versatility, affordable prices make our extruders attractive to any consumer. More than 1,000 units of our extruders operate in Ukraine and CIS countries.

  • We provide free training on operation of welding extruders for our customers with the possible visit of our specialists to the customer’s site.

Contacts

If you have any questions with our extruders, feel free to contact us!